The installation conditions of BT35 axisstream explosion -proof mainly include the following points:
Basic requirements: The fan should be installed on a firm basis, and the foundation should have sufficient strength and stability to withstand the weight of the fan and the vibration of the runtime.
Space requirements: There should be sufficient space around the fan to facilitate entering and out of the air, and it is also conducive to maintenance and maintenance.Generally speaking, there should be a space around the fan at least 1 meter.
Pipeline connection: The entrance and export pipes of the fan should be firmly connected and there should be no air leakage.The weight of the pipeline should not be affected by the fan of the fan, and the supporting frame should be added during installation.
Power requirements: The fan should be connected to a stable power supply, and the power supply voltage should meet the rated voltage requirements of the fan.At the same time, the fan should be reliable to prevent safety problems caused by electrical failures.
Environmental requirements: The fan should be installed in places without obvious shaking and impact to avoid being installed in environments with corrosive gases or flammable and explosive hazards.The ambient temperature should be within the range of the fans, generally -20 ° C ~ 40 ° C.
Pre -installation inspection: Before installation, check the fan in detail to ensure that it is intact, the model is correct, and meets the requirements of the use.At the same time, the level and stability of the basics should also be checked, and whether the power supply and pipeline connection should meet the requirements.
In short, the correct installation conditions are an important guarantee for the normal operation and service life of the BT35 axial flow defense ventilation.During the installation process, it should be operated strictly in accordance with the installation conditions to ensure the correctness and reliability of the fan installation.
The above is the installation conditions of the BT35 axis flow defense fan