The main components are: motor, impeller, outer cylinder, inner cylinder, guide leaves, bottom feet, etc. It should be paid attention to the following matters:
1. When installing the oblique fans, pay attention to maintaining the horizontal position of the fan, adjust the connection between the fans and the foundation surface and the water outlet pipe, so that it must not force it when cooperating.Whether to enter the remaining tools and other objects inside the fan.
2. Fan responds to a comprehensive inspection of the installation component, partly is complete, and each member is tightened by coupled.
3. When installing the fan, the impeller must be checked. Whether there is the phenomenon of the impeller hit the case. If it is not appropriate, it must be adjusted. The fan should have rainproof measures when used in the open air.
4. The trial operation of the oblique fans should be performed after the overall inspection is qualified .. In order to prevent the motor from overloading, the flow regulating valve should be turned off before starting the fan to make the startup state without loading, and then gradually open the valve for full load or design work point operation.
5. In operation, if the fan has severe vibration, impact and other abnormal conditions, they must immediately stop the inspection.
6. The internal schedule Clearly clear the dirt and other impurities of the oblique fan to prevent corrosion.
The oblique fan has the characteristics of high pressure, large air volume, high efficiency, compact structure, small noise, small volume, convenient installation, etc. The oblique fans are widely used in the ventilation of civilian buildings such as hotels, restaurants, shopping malls, office buildings, stadiums, etc.Ventilation of pipelines and ventilation of industrial and mining enterprises.
The above is the structural characteristics and installation points of the oblique fan