Stainless steel centrifugal work standards must be operated by 280 ° C axial flow in the application management method process according to the characteristics of maintaining social stability. There is no other abnormal and noise in operation.Unstable rate is because of what is the key? How can stainless steel centrifugal occur different speed and instability?
According to the sound of the operating of the fan chassis, there are also rotation of the centrifugal impeller to watch the gauge chassis, which will not be too difficult to notice that the speed of the stainless steel centrifugal fan is unstable. What is the original caused by?
1. The power circuit of the stainless steel centrifugal fan has problems such as poor contact, short -circuit, short -circuit failure and other problems.Therefore, it is necessary to check the power circuit of the fan shell from various fields, find the existing problems and solve it
2. The operation of stainless steel centrifugal fan will continue to cause the speed of speed. For example, the firbox centrifugal impeller or rolling bearings changes, and no inspection is not found during operation. ThereforeThe situation of imbalance;
3. The second A tube of the stainless steel centrifugal fans can occur. The same is the same as everyone can cause the fans of the airbox to be unstable social problems;
4. There is a difference in the middle of the carbon coating of the electric motor and fan chassis of the fan and firm, which is different. Therefore, the resistor of the stainless steel centrifugal fan needs to be checked. If the resistor cannot be changed with adjustment, then it will then thenIt shows that the resistance level occurs at the level of the resistor;
Stainless steel centrifugal fans, tone friction resistance contacts or openness or open, resulting in the unstable speed of stainless steel for centrifugal fan.
What is the unstable operation speed of stainless steel centrifugal fan? Most of them are problems on the power circuit, but it cannot be removed from the hardware configuration of the stainless steel centrifugal fan. ThereforeThe actual operation needs to be implemented in accordance with regulations. It is not possible to avoid things, so that you can avoid the application of a large amount of stainless steel centrifugal fan.