3C firefighting smoke import and export should have a separate support. The weight of the pipeline is not allowed to add the weight of the pipeline to the components of the fire and ventilation equipment. When installing, the horizontal position that needs to be paid attention to.Cant be forcibly connected.The installer understands the specifications, forms, form rotation directions, and air flow in and out direction of 3C fire discharge.Before the installation, both sides must check whether the leaf wheels have a bump, check each component, and pay attention to whether the wind leaves are damaged or deformed due to transportation.In terms of wires, the wiring of fire and ventilation equipment should be correct and reliable, the shell should be properly grounded, and the ground should be reliable.The power supply is complete and meets relevant requirements.Electrical wiring must have professional knowledge of electrical wiring.After the 3C fire smoke installation, the power supply can be connected without an exception by turning the impeller to check whether it is too tight or touched.When installation of 3C fire smoke, both the bracket must be stable with the foundation plane level.After the 3C firefighting smoke is installed, it is necessary to check the sealing of it.If there is a gap, you can use a sunny board or glass glue for seal.The 3C fire smoke installation base platform is 400 ~ 500mm high, reducing rainwater knocks, extending the service life of the equipment, and a rubber vibration pad between the device base and the reserved foundation.Effect of earthquake.
The above is the precautions for installation of 3C fire exhaust fan