Do I need a pipeline to change the fan?
The racks are mainly used for power plant soda pipelines or boiler equipment, generating heat shifts and equipment in operation.Calculate the work and heat displacement requirements of the spring support racks and thermal displacement according to the pipeline force, and the factory sets the spring bracket shelter according to the design load: that is, the spring pre -pressure and the cold load position set;Theoretical and theoretical work position.Down
Lets take a look at which points for the installation of the pipeline air fan.
1. The shape and size of the pipeline air replacement equipment shall meet the coordination standards of the building mold.When the ceiling is installed, the indoor net height should not be less than 2.2m.
2. Set the socket or switch for the dedicated band of grounding in the pipeline air -changing fan. The switch position should be easy to operate; the linkage switch, delayed switch, or human induction switch can be selected as required.
Pipe fans change fan cleaning method
The purpose of ventilation is to remove the dirty air in the room and adjust the temperature, humidity and sensory effect.Pipe -changing air fan is widely used in family and public places.The advantages of pipeline replacement fans are more widely available, the air volume is larger, and the noise is lower. Optimize the wind wheel-scientific van design and optimize the wind wheel structure.Excellent motor, quiet operation, long -lasting quality, longer life.Therefore, it is necessary to understand his cleaning method.
After a long time of operation, the filter affects the air volume and effect due to dust and dirt blocking. It needs to be cleaned every two weeks. The method is as follows: unplug the power supply; twist the screw and remove the rear cover.Pull out the connector and take away the filter and the rear cover together; use detergent and water to reconcile as appropriate concentration; put the filter and rear cover into the container, wash 10-15min and replace it with water to clean it. Do not put the small motor.Immerse in water, do not rinse the small motor with water; reinstall the filter and rear cover back to the original place.The distance should not be too close, and the air flow and humidity should be kept balanced.
The pipe air -changing fan is driven by the motor to drive the air -rotating airflow, which makes the air -to -indoor air exchange electrical appliance.Also known as pipeline fan or pipe fan.It has good characteristics. Through the above -mentioned explanation of installation and cleaning methods, I hope to help users help users during the installation process.
For more relevant information, please pay more attention to us- ——