When using the new group, you need to pay attention to the following questions:
1. Check the components of the fresh air unit: confirm whether the parts are complete, such as whether the main components such as leaves, the spindle, and the bearings are damaged, whether the transmission group is flexible, and whether the rotation direction of the leaf and the shell is consistent.If a problem is found, it should be maintained and adjusted immediately.
2. Ensure horizontally: The fresh air unit should be lifted horizontally, and the suspension shock absorber should be configured. The boom and the unit base are kept vertical, which is locked by the nylon mother or other methods.
3. Prevent the weight of the outer water pipe and duct: The fresh air unit must not bear the weight of the outer water pipe and duct, and the inlet and air outlets of the fresh air unit are connected to the soft connection of the air duct application.
4. Ensure that the wall is not damaged: When choosing the installation position, you cannot at the cost of destroying the overall structure of the room, and you should ensure that the wall should not be damaged.
5. Pay attention to the lifting ability: During the lifting process, ensure that there is sufficient wealth of wealth, and pay attention to the center of gravity of the liaison parts to avoid unnecessary accidents during the lifting process.
6. Treatment of the location of the air outlet: The location of the air outlet is very important. You should reasonably choose the location of the new air system out of the air outlet and deal with the relationship between the position and return the air inlet to avoid mutual influence.
7. Check the inspection after power -on: After the new air unit is powered on, you need to check whether the wind turbine is correct. If there is a reversal situation, it should be stopped immediately and the phase sequence is re -wiring.In addition, each typhoon mechanical control device in the unit requires good grounding and overloading, overheating, and absence of equal protection to ensure good grounding.
8. Regular maintenance: Regularly check the operating status of the fan, filter and wiring conditions, etc. If necessary, it should be repaired or replaced in time.
9. Pay attention to cleaning and maintenance: It should be cleaned up and maintains the internal and external surfaces of the fresh air unit to maintain its clean and good operating state.
10. Comply with operating regulations: During the use process, the operating procedures of the fresh air unit should be strictly abide by the new air units to avoid damage or safety accidents caused by improper operation.
In general, the correct use and maintenance of fresh air units are essential for ensuring its performance, extending service life, and ensuring safe operation.During use, it should be operated strictly in accordance with relevant regulations and regularly maintain and maintain.
The above is the problem that the device should pay attention to the use of fresh air units, hoping to help you.If you want to know more about related information, please pay more attention to us--