For the WEX side wall, its device can be made into anti -corrosion and explosion -proof types according to the requirements of the conveying medium. It is the mainlands habit of gas compression and gas transportation machinery.Gas pressure energy and kinetic energy, and the machine that transports the gas out.
The wex wall fan uses an advanced premium blade, a low -noise exterior or internal rotor -specific motor direct drive.The square rainproof cover structure is strong and beautiful.It has the characteristics of low noise, large air volume, reliable operation, wide range of performance parameters, and simple installation. It is widely used in the side wall wall -type ventilation and ventilation of factory and mining enterprises and civilian and commercial construction projects.
At the same time, after the wall fan is fully used, do not forget to maintain the impeller of the side wall fan. At the beginning of the impeller operation and all regular inspections, as long as you have a chance, you must check whether the impeller is cracking, wear, accumulate, accumulateDust and so on.
As long as it is possible, the impeller must be kept clean, and the dust and rust skin are regularly brushed with steel wires, because the running time is growing, these dusts are uniformly attached to the impeller, causing them to be uniformly attached to the impeller.The leaves of the leaf wheel were damaged, and even caused the rotor vibration.
As long as the leaf wheels are repaired, they need to be balanced.If possible, you can use a portable trial balancing instrument to balance at the scene.Before the motion balance, all tight bolts must be checked.Because the impeller has been running for a while in an unbalanced state, these bolts may have been loose, so the maintenance of the wex wall fan is essential.
The above is the precautions for the maintenance of the wex wall fan. I hope that the above content can be helpful to everyone. Thank you for your viewing and support. In the later period