Environmental protection unidirectional flowing new air replacement machines are "forced to exhaust, naturally sending air". One -way flowing new air -changing machine can realize the continuous circulation and update of indoor air, providing people with a healthy and comfortable living environment.
For the details of the installation of unidirectional flowing air -changing machines, the following are some key steps and precautions:
Installation location selection:
Non -residential areas should be selected for installation, such as bathrooms, kitchens, garages and laundry rooms to avoid noise interference in the residential area.
Do not install places where direct -pairing or bright fires, and places where it may leak.
Do not install harmful gases such as acid, alkali, organic solvents, coatings such as mechanical factories or chemical factories or places with corrosive ingredients.
The air inlet should be installed in the location of the discharged air directly. The installation position of the indoor inlet and indoor air outlet should be opened as much as possible.
Preparation before installation:
Before installation, you need to ensure that there is sufficient operating space and check whether the power and exhaust pipeline meet the requirements.
According to the situation of the installation site, it is recommended to install the leakage circuit breaker.
Mounting brackets:
Installation of a bracket is a step for installing unidirectional flowing new air gas changes. It is necessary to ensure that the bracket installation is stable and can withstand the weight of the fresh air gas exchange machine.
Before installing the bracket, the position of the bracket needs to be marked to ensure the accurate installation of the bracket.
Connect the exhaust pipe:
Connect the exhaust pipe to the air outlet of the fresh air gas -changing machine, and then extend the exhaust pipe to the place where the exhaust is needed.
The length of the exhaust pipe should be as short as possible to ensure the exhaust effect.At the same time, it is necessary to connect tightly when connecting the exhaust pipe, and there is no leakage.
The tilt of the exhaust pipe should be less than 3 degrees to ensure the smooth running.
Connect the power supply:
When connecting the power supply, you need to turn off the power switch first, and then connect the power cord to the fresh air gas exchange machine.
Pipe installing:
When installing, it is advisable to fix it every 1 meter to avoid vibration of the pipeline.
The seams of the connection between the pipe and the host are fixed with tin foil cloth sticky tape. The tape paste should be flat and cannot be wrinkled.
Debugging and acceptance:
After the installation is completed, it is necessary to debug, including the safety inspections before operation, the trial movement of the fan in the host.
Check whether the fresh air system is running smoothly, as well as abnormal vibration and sound.
The final debugging result is accepted by the owner.
Precautions:
During the installation process, the connection parts of all interfaces and pipelines should be closely connected, and air should not be leaked.
Inlet air inlet should be installed with anti -bird nets or similar devices to prevent birds or other animals from entering.
Do not install, disassemble or modify it by yourself. Please entrust sales stores or professional installation companies for installation.
The above is some detailed steps and precautions for the installation of unidirectional flow air replacement machine.During the installation process, it is necessary to follow relevant safety specifications and operating procedures to ensure the safety and smooth progress of the installation process.