Many users who use equipment may be burned by the motor.If users want to reduce the occurrence of motor being burned, they must understand the premise of the reason why this phenomenon will occur.Lets briefly introduce the following article, why the equipment is prone to burning motors during the process of adjustment.How to deal with this situation.
1) Not satisfied with the formal electrical debugging, and the temporary electricity debugs, resulting in a lack of firing;
2) Poor contact of the electronics box causes a lack of firing;
3) Dual -speed fans high and low speed wiring error causes instantaneous burning;
Based on the above three points, the most burning phenomenon is that the electrical control box contacts are in poor contact and the dual -speed fan wiring error causes the machine to burn.Therefore, it is necessary to check whether the power distribution box power supply is normal, whether the joints are firm, whether there are loosening, and whether the connector is correct, and whether the joints are correct. After the various inspections are completedFirst turn on low speed, then turn on high speed after the power is stopped. Whether the stroke rotation direction of the stroke machine is consistent with the conversion process. The dual -speed fans should run at low speeds. After running normallyEssence