Daily maintenance is essential for ensuring the normal operation of 3C smoke and extending its service life.The following is the detailed work step of 3C smoke daily maintenance:
1. Regular inspection and cleaning:
Check the fan case, inlet and air outlets regularly to ensure that it is not blocked and accumulated.
Use soft cloth or vacuum cleaner to clean the surface and dirt on the surface of the fan and the inlet.
For the cleaning inside the fan, the fan should be opened regularly according to the usage conditions and environmental conditions.During the cleaning process, be careful not to damage the parts inside the fan.
2. Check the fastener:
Regularly check the fasteners inside the fan, such as screws, nuts, etc. to ensure that it is fastened and not loose.
If the fastener is found to be loose or shed, it should be tightened or replaced in time.
3. Check the motor and bearings:
Check the working status of the motor to ensure that it runs smoothly, no abnormal noise and overheating phenomenon.
Regularly check the lubrication of the bearings, such as poor lubrication or deterioration, should be replaced in time.At the same time, pay attention to the amount of lubricating fat to avoid excessive or too little.
4. Check the transmission part:
Check the transmission parts of the fan, such as the impeller, the transmission shaft, etc., to ensure that it has no deformation, crack and wear.
If there are abnormal transmission parts, it should be repaired or replaced in time.
5. Check the electrical system:
Check the wiring and components of the electrical system regularly to ensure that it has no looseness, damage and short circuit.
If the electrical system is found abnormal, repair or replace it in time.
6. Run test:
After daily maintenance, the fan should be tested to ensure its normal operation and smoke exhaust effect.
If the fan is found to have abnormal conditions during the operation, it should be stopped and repaired immediately.
7. Records and reports:
Detailed records of each maintenance process and problems discovered in order to facilitate subsequent analysis and improvement.
If there is a serious failure or hidden danger of a fan, report to the superior in a timely manner and take corresponding measures.
8. Training and education:
Regular training and education responsible for maintaining 3C tobacco exhaust fan, which improves their maintenance skills and safety awareness.
The training content includes but not limited to the structure, working principles, maintenance methods and safety operating procedures of the fan.
Through the implementation of the above -mentioned daily maintenance measures, it can ensure that the 3C smoke exhaust fan is always in a good working state, improves its smoke exhaust effect and service life, and provides a strong guarantee for the safe operation of buildings and facilities.
The above is a detailed explanation of the daily maintenance of 3C smoke exhaust fan