The shaft flow low noise is the same as other types. It needs to be maintained and maintained in use, so as to better allow the axis flow to play its due role, and it can be extended.They are all issues that the majority of users are concerned about. What work needs to do during the maintenance and maintenance stage of the axis to achieve the effect of maintenance?
1. What needs to be done is that during the operation, the axis flower needs to compress the smooth flow of the air duct. The power of the axis will be overloaded in the air volume for a very small air volume. Be careful not to use the environment with insufficient wind or the valve that is fully closed for a long time.2. Before the use of the axis fans, the fan must be required to test the fan. This process is to ensure that the fan does not fail to run, so that the effectiveness of the fan is largely guaranteed;
3. If the wind has not been used for a long time, and then use it again, be sure to check whether the various components of the fan are still firm. Once there is a relaxing phenomenon that there is something to do, it must be tightened in time., Will not be used normally due to the loosening of the fan component;
4. Before the fan starts, it is necessary to check the items that hinder rotation in the fan and pipeline.
The above is the maintenance and maintenance of the axis flow fan