The main control parameters of fire discharge of fire discharge are working temperature, air volume, full pressure, efficiency, noise, motor power, speed and axis power.In order to ensure the effectiveness of fire smoke, it is necessary to ensure the maintenance of fire smoke.The specific operations are as follows: 1. Break the main power of the main power, hang the "prohibiting closing of the gate" sign, and check whether the motor ground wire is good.2. Whether the manual inspection indicator light, voltage, and current meter work are normal, whether there is no sound in the operation of each component of fire, and whether the three -phase current value is balanced.3. Try the two -hour trial, and observe whether the temperature of the motor bearing and the increase in motor temperature are normal.Make sure fire smoke running.4. Adjust the tightness of the belt used by the fire discharge, turn the wind wheel by hand to observe whether the leather row is stable.5. Keep the use environment of dual -speed fire high -temperature smoke clean and clean, and keep the surface clean; there should be no debris in the entrance and air outlets, and regularly clean up the dust and dust miscellaneous objects in high temperature smoke and pipelines.6. Check the polyester oil filter, and check whether the oil dripping of the oil cavity can be deformed in daily censorship.7. Fire fire exhaust can be manually booted inspection indicators, current, and voltage meter power. Check whether they are normal, and check whether there are different sounds of fire smoke components, and whether the three -phase AC current value is balanced.8. The daily review of the atmosphere filter can be dirty.If you are dirty, you can remove the atmosphere filter, spin the butterfly screw mother, take the lid, and clean the filter sponge.The above is about the maintenance of fire smoke. Do you know it?Hope to help you!More related information follow us