1. Timely cleaning the air outlet and filter
After the machine is used for a period of time, the air outlet and filter will inevitably accumulate dust. If it is not cleaned or replaced in time, it will easily cause secondary pollution of indoor air and cause a health threat to the indoor human body.Therefore, it is very important to clean the air outlet and filter in time. It is very important to replace the filter when necessary.
2. Check the operation of wind speed regularly
The performance of the wind speed of the fresh air system may be relatively decreased with the time of use.In order to increase the service life of the fresh air system and ensure the normal operating effect of the fresh air system, it is necessary to regularly contact professionals to check the equipment and adjust the air volume.
3. Regularly check the pipeline gas tightness
Once the pipeline of the fresh air system leaks, it will affect the normal use of the equipment.The pipeline leakage may cause the dirty air that should have been discharged outdoors still remain indoors, which greatly reduces the effect of the fresh air system and affects peoples health to a certain extent.Therefore, the professionals should be contacted regularly to check the pipelines air tightness. Once the problem is found, the merchants or manufacturers should be contained in a timely manner for maintenance.
4. Pay attention to the connection of the host
The new air system host is used for a long time, which can easily make it loosening and aging, and cause problems such as fire. The hidden safety hazards cannot be underestimated.Therefore, the new air system host should also be checked regularly to avoid safety accidents.
5. Maintenance and maintenance of the machine control panel
The control panel of the fresh air system is also a very important part.The long time of control of the panel will adsorb a large amount of dust and gather tide, which will affect its normal use.Therefore, the control panel should also be regularly maintained.At the same time, avoid directly contacting the control panel.
The above is the maintenance of the fresh air system