Precautions for the use of explosion -proof hot water heating include::
1. Installation location selection: It should be installed at the center of the place near the use place to ensure that the airflow can circulate smoothly.At the same time, avoid being installed at the door, window, etc. to avoid the loss of hot air.
2. Temperature settings: The temperature is reasonably set according to actual needs to avoid too high or too low temperature to cause damage to the device or cause discomfort to the human body.It is recommended to set the temperature within the appropriate range and adjust it according to the actual situation.
3. Humidity control: Explosion -proof hot water heaters will make the air dry during the operation. Therefore, proper humidity should be maintained during use. You can increase the indoor humidity through the humidifier or water basin in the room.
4. Electrical safety: Explosion -proof hot water heaters usually need to use power supply, so it is necessary to ensure that the electrical connection of the equipment must be safe and reliable.Check whether the power plug and socket should be intact before use, and avoid using damaged or aging plugs and sockets.Check whether the electrical lines are intact to avoid causing fires or electric shock accidents due to aging or short circuits.
5. Equipment maintenance and maintenance: Regularly clean the surface and inside of the equipment, avoid damage to the equipment from dust and dirt.Keep the entrance cleaning and clean it often to keep it unobstructed.
6. Safety operation: When turning on, closed or maintained the equipment, the power must be cut off, and the power operation is strictly prohibited.Power maintenance is strictly prohibited in dangerous areas.When the device is running, the surface temperature is high, touch is strictly prohibited, and flammable items such as clothing are also prohibited.
7. Grounding and voltage matching: Reliable grounding must be reliably ground during installation. The ground resistance should not be greater than the specified value.The installation of the power supply voltage must match the voltage level of the heater to ensure the safe operation of the equipment.
Following these precautions can ensure the safe and efficient operation of explosion -proof hot water heater, while extending the service life of the equipment.In the process of using, if any problem or abnormal situation is encountered, use it immediately and contact professionals in time for maintenance.
The above is the precautions for the use of explosion -proof hot water heater