When installing the side wall, you need to pay attention to the following:
To ensure that the foundation is solid and flat, you can withstand the operating load of the fan. At the same time, you need to check whether the connection size of the foundation and the fan meets the design requirements.
Before installation, you should fully understand the instructions of the axis flow fan, and to clarify the ventilation system drawings of the fan work. After the equipment arrives, you need to open the box to check whether the various components of the fan are complete and whether the outside of the case is injured.There are bumper injury deformation, whether each component is connected tightly, the blade, the motor is damaged, and whether the leaves rotate are flexible. If the problem is found, you should find the relevant units to repair and replace it in time.
The installation location should be as far away from high temperature, dust, and corrosive substances to avoid adverse effects on equipment performance.At the same time, it is necessary to ensure that the equipment is installed on a strong and stable basis to avoid vibration and noise during runtime.
Before starting the side wall fan, the equipment must be checked in a comprehensive inspection.Including checking whether the blasts are intact, whether the bolts are tight, and whether the lubricant is sufficient.In addition, the power supply voltage should be checked whether the switch is sensitive and reliable.
During the operation of the wall fan, it should pay close attention to its operating status.If there is an abnormal noise, the vibration of the shell of the touching device, the vibration of the shell of the device.If an abnormal situation is found, it should be stopped immediately to eliminate the failure.
In order to ensure the stable operation of the wall wind for a long time, maintenance should be carried out regularly.Including the dust and oil stains on the surface of the equipment, replace the lubricating oil regularly, and check the tightening of the belt.
The operator must strictly abide by the safety operating procedures, and prohibit cleaning the internal dust inside the equipment or conducting maintenance operations during operation.When repairing the equipment, the power must be cut off to ensure that the working area is safe and reliable.
The above information is for reference only, and the specific precautions should be adjusted according to the actual situation.For more information, it is recommended to consult professional installation personnel.