Environmental protection side wall is a device that is widely used in the workshop and civilian and commercial construction projects of factory and mines.It adopts advanced predatable blades and low -noise outer rotor or internal rotor -specific motor direct transmission. It has a square shell design and is convenient for installation on concrete walls, brick walls, or light steel pressure wall plates.At the same time, the square rain cover structure is strong and beautiful, can adapt to the noise requirements of different places, and equipped with a variety of filters to improve air cleanliness.
It is very important to avoid the risk of leakage during the installation of the wall fan.Here are some key steps and precautions:
Check the power cord: First, ensure that the power cord used is not damaged or aging.Any damaged power cord should be replaced in time to avoid leakage problems caused by damage to the insulation layer.
Correct wiring: When the wiring, it should be carried out in accordance with relevant regulations and the requirements of the instructions to ensure that each contact is firm and reliable, and there is no loose or virtual connection.At the same time, avoid using inappropriate wiring methods or materials to avoid increasing the risk of leakage.
Fan ground: Wall -sided fan must be ground to ensure electrical safety.During the installation process, it is necessary to ensure that the fan shell is well connected to the ground wire, and the ground resistance should meet the relevant standards.
Using insulation tool: During the installation process, use good tools should be used to avoid short -circuit or leakage between the tools and power or fan components.
Installation environment inspection: Before installing the wall fan, check whether the installation environment is dry, waterless or humid.The humid environment may lead to the moisture of electrical components and increase the risk of leakage.
Regular inspections and maintenance: After the installation is completed, electrical safety inspections should be performed regularly, including checking the state of the power cord and the connector, whether the ground is good, etc.At the same time, the necessary cleaning and maintenance of the fan ensure its normal operation and extend the service life.
Following the above steps and precautions, the risk of leakage during the installation of the wall fan can be greatly reduced.But please note that if you are not familiar with or do it correctly about electrical installation, it is recommended to seek the help of professional electrical workers to ensure the safety and reliability of the installation process.