Environmental centrifugal curtain machines are widely used in business and industrial fields, such as shopping malls, supermarkets, hotels, hospitals, and factories. These places need to maintain the indoor temperature stability and improve customers shopping or dining experience.Its advantages include strong wind, can blow air, small noise, anti -mildew and long -term service life.
In the process of using the curtain machine, some common small problems may be encountered, and these problems can usually be solved through simple inspection and maintenance.The following are some common small problems and its possible solutions:
Excessive noise:
Reason: It may be caused by the wear of the blade of the fan, the imbalance of the motor or the loosening of the fastener.
Solution: Check and replace the wear components, adjust the balance of the motor, and tighten the loose components.
Insufficient air volume:
Reason: It may be due to the air inlet or outlet of the air curtain, the wind turbine is too low, or the motor failure is too low or the motor failure.
Solution: Clean up and exit the air outlet, check the working status of the motor and fan, and replace or repair if necessary.
The air outlet is not hot or the temperature is lower than the set temperature:
Reason: It may be due to the ash outlet, the heater failure, or the absence of the power supply.
Solution: Clean up the air outlet and heater, check whether the power supply is absent, and consider the impact of the external environmental temperature.
The machine is not running or windless:
Reason: It may be due to the shortage of power supply, switch damage, impeller loose or motor, capacitor damage, etc.
Solution: Check the power supply and switch, confirm whether the impeller is loose, and check the state of the motor and capacitance.
Unstable installation or loosening internal accessories:
Reason: This may lead to sudden noise in the air curtain.
Solution: Check and tighten installation components, such as facial networks, wind guides, and fan imangar.
Cant heated:
Reason: It may be due to the heating line failure, the temperature controller failure or the heater itself.
Solution: Check the status of the heating line, the temperature controller and heater, and replace it if necessary.
Controller failure:
Reason: This may lead to the non -working or other problems occur.
Solution: Check whether the controllers electrical line is unobstructed, try to replace the controller or repair it.
When encountering these small problems, try to conduct simple investigation and maintenance first.If the problem still exists or cannot be resolved by itself, it is recommended to contact the professional maintenance personnel for inspection and maintenance.In addition, regular cleaning and maintenance of the wind curtain machine can effectively prevent these problems and extend the service life of the curtain machine.