When the square wall form flow is too noisy when running, you can try the following methods to solve:
1. Check the installation situation: First, make sure the fan is installed correctly and firmly, and avoid vibration and noise caused by improper installation.
2. Replace the low noise fan: If the noise is too large due to the design or quality of the fan itself, you can consider replacing a fan with a low noise model.This fan has taken into account noise problems when designing, and adopts more efficient, stable, and low noise design.
3. Check and adjust the fan blade: damage or imbalance of the blades can also cause noise to increase.Therefore, it is very important to check the status of the blades regularly and ensure that the balance of the leaves is very important.
4. Increase sound insulation measures: Set up sound insulation facilities around the fan, such as sound insulation, soundproof wall, or sound insulation barrier, which can effectively isolate the noise generated by the fan.At the same time, you can install a shock absorber or shock absorption pad at the bottom of the fan to reduce the noise generated by the fan vibration.
5. Adjust the speed of the fan: Sometimes, the high speed of the fan can also lead to increased noise.Under the premise of ensuring the ventilation effect, properly reduce the speed of the fan and help reduce noise.
6. Check the power supply and voltage: The unstable or high power supply voltage may also cause the fan noise.Therefore, it is important to ensure that the power supply voltage is stable and meets the work requirements of the fan.
If the above methods cannot solve the noise problem, it is recommended to contact professional fan maintenance personnel for inspection and maintenance.They can provide more effective solutions based on specific conditions.At the same time, in order to ensure the safety of personnel and the normal operation of the equipment, before performing any maintenance operation, make sure to turn off the fan and disconnect the power.
The above is the process of noise when the fan is running.