Explain the use of industrial warmth for you
Step 1: First of all, prepare the power cord of the corresponding square cable connected to the heater (please connect the power cord containing the ground wire)
Step 2: In order to make the surface sturdy, the heater should stay away from the humid environment and flammable items.
Step 3: Connect the power supply of the heater.
Step 4. Set the temperature of the temperature regulator to make it bigger, so that the heater runs the power.
Step 5. Warm wind opportunity connection to heating selection device.
Step 6. The warm wind will start automatically and stop, so as to keep the indoor temperature constant.
Step 7. Once the room temperature reaches required, the heating element will stop working, but the fan will continue to work. Once the temperature drops, the heating element will continue to heat.
Step 8. Before turning off the heater, open the thermostat OFF, then rotate the knob, the warm wind is closed, so that it will cool down within 2 minutes.
Step 9. The temperature regulator time is extended. If you forget to turn off the temperature regulator at the OFF position, the temperature regulator is cut off before turning off the heater, and the fan will continue to work. When the temperature of the heater is close to 50 ° C.When the temperature drops to about 40 ° C, the temperature regulator and fan will stop working, and the warm wind will cool down.
Step 10. After use, first turn off the heater, and then pull out the plug.
Step 11. The temperature regulator is overheating or abnormal operation. At the same time, it will fail. The non -self -reset temperature regulator will be operated, and the equipment will be closed.Remove the plug on the socket to automatically cool the machine, and then use a steel needle to contact the non -self -reset temperature regulator button.When you hear a clear click sound, it means the circuit is connected, insert the plug into the socket, and open the industrial heater.
The above is the introduction of the industrial heating fan that Xiaobian will explain for you. I hope that the above content will help you. If you want to know more information, please pay more attention to us —