The installation of thermal water heating needs to be determined in conjunction with the heating system. The commonly used heating systems are: the heating of the workshop plant, drying house drying, high space heating, gardening greenhouse heating, aquatic farm heating, etc.Although different system warm installation positions will be different, the installation method is fixed. Three types of direct blowing, smooth blowing, and oblique blowing type
1. Direct blow.The hot water heaters are installed on the middle axis on the side of the inner wall, blowing to the outer wall or outer window. Because there is a gap in the outer window, the outdoor cold air is easily penetrated into the room.Low temperature protection effect.This installation method is commonly heated in the drying system and a small number of workshop factories.
2. Cingard blowing.The heater is installed in the vertical axis direction in the middle of the room, and it is arranged by the oblique backing of the cross -back. The hot air blows to the outer wall. This method is suitable for large spaces. The span distribution is obviously heating areas, such as gardening greenhouses and farms.Due to the rules of crop distribution in the greenhouse and clear conditioning, all sides belong to the outer wall. The oblique blowing type can expand the heating area to a greater extent to achieve a better temperature -maintaining effect.
3. Blow layout.If the heater cannot be arranged on the vertical axis of the room, it can make the thermal aircraft connecting and shot in series along the four walls to avoid interference of the air flow and make the indoor air temperature evenly.
The above are some of the installation methods of hot water heaters