The combined air -conditioning unit is mainly composed of the following parts:
1. Box panel: The outer layer usually uses high -intensity color steel plates, and the inner layer is light insulation material such as poly foam plastic or polyurethane.Through the automatic composite machine, the two are made of high -level adhesives, which have the performance of light weight, high mechanical strength, insulation, sound insulation, corrosion resistance, water -resistant steam penetration and climate resistance.
2. Framework: Made of mechanical cold curved profiles, with high strength and no cold bridge.This frame is generally equipped with a steel base and the surface is processed by anticorrosion.
3. Fans: Double -advanced air fans are often adopted. This type of fan has good air dynamic characteristics, such as accurate running points, wide area, small vibration, low noise, long life and other characteristics.
4. Vibration reduction device: In order to reduce the effect of vibration caused by wind unit components on the crew, the vibration reduction device is usually set up between the base and the fan rack to effectively reduce the vibration of the crew.
5. Surface cooler (table cold device): The copper tube ripple aluminum wing structure is used, which is made of device stamping and made of mechanical swelling tube.The surface of this structure is not easy to accumulate ash, easy to clean, and effectively prevent the breeding of the germs.
6. Filtering section: The various filters produced according to standards have the characteristics of good filtering effect, small wind resistance, stable performance, strong versatility, and reusable use.
7. Concrete water disk: Install drainage water seal outside the unit to ensure the exclusion of condensate water, keep the water tray dry, and effectively prevent bacteria from breeding.
In addition, according to the use and specifications of the combined air -conditioning unit, it may also include components such as throttling device, condenser, compressor, evaporator, as well as other functional segments such as fresh air backwind mixed segments, silenced audio sections, and thermal recovery sections.
Please note that the above is only part of the combined air -conditioning unit. The specific configuration may be different according to the actual needs and application scenarios.
The above is the introduction of the component of the combined air -conditioning unit