Welcome to Kena Environmental Technology Co., LTD

Maintenance of WEX Wall Formula

Views :
Update time : 2024-06-21

The maintenance of the WEX side wall is crucial. The following is the key steps and precautions for maintenance work:
1. Read the instructions and product samples to understand the specifications, forms, leaf rotation directions and airflow direction of air flow, etc. to ensure a full understanding of the fan.At the same time, check whether the components of the fan are intact, and it should be repaired in time if it is damaged.
2. When installing the wall fan, there must be a safety device to prevent accidents and install it by professionals who are familiar with relevant safety requirements.
3. Select the magnetic control button switch to prevent the motor burned from poor contact.
4. Pay attention to the continuous use time of the fan, and should not exceed 8 to 10 hours to prevent the motor from overheating.
5. Regularly check and adjust the belt of the fan to be loosened, every three months to ensure that the fan is running smoothly.
6. Ensure that the shuttle of the outlet is greater than 70%to maintain a good ventilation effect.
7. The motor part should pay attention to waterproof and keep clean to prevent water and dirt from damaging the motor.
8. Keep the wall wind machine in the open air mesh to avoid blocking and affecting the effect of entering the wind.
9. Regularly clean the leaves, shells and filters of the fan to prevent dust and dirt accumulation and affect their working efficiency and life.Clean the fan blades every six months, and clean the surface of the fuselage at the same time to ensure that the fan is in a good working state.
10. Check the fastener of the fan regularly to ensure its tightness and reliability and prevent hidden safety hazards caused by loosening.
11. Check the lubrication of the fan regularly to ensure that lubrication is sufficient and prevent work failure caused by insufficient lubrication.
12. Check the motor of the fan regularly to ensure that it runs normally and prevent work failure caused by motor failure.
The above is the main steps and precautions for the maintenance of the WEX wall fan.Through these maintenance work, it can ensure the normal operation of the fan, extend its service life, and improve its work efficiency.When performing maintenance work, be sure to pay attention to safety and avoid accidents.

Related News
Read More >>
Pipe connection method of air Pipe connection method of air
06 .18.2024
Air suspension fans are efficient, environmentally friendly ventilation equipmen
Installation and debugging of Installation and debugging of
06 .18.2024
Before installation: Before installation, first prepare the materials and tools
Advantages and adjustment meth Advantages and adjustment meth
06 .18.2024
A centrifugal fan is a mechanical device that relies on input mechanical energy
How to debug a centrifugal cur How to debug a centrifugal cur
06 .30.2024
The debugging of the centrifugal curtain machine mainly includes the following s

Leave Your Message