Welcome to Kena Environmental Technology Co., LTD

How to improve the construction protecti measures of asphalt can

Views :
Update time : 2024-06-22

1. Local heater inside the equipment is usually used to storage and heating of asphalt storage and heating of transportation and municipal systems.The equipment uses an organic carrier thermal (thermal conductivity) as the heat transfer medium. The coal, gas, or fuel furnace is the heat source, which is compulsive from the thermal oil pump to heat the asphalt to the use temperature.
2. When the temperature is low, the asphalt activity in the asphalt heating tank will be greatly reduced. If the temperature cannot be kept, the time will even solidify together to form a block.The tank will also be destroyed, so maintaining the temperature can ensure the activity and liquidity of the asphalt. This requires the staff to pay attention when it is found that the temperature is lower than the prescribed temperature when it is found.Report.
3. When the device is lower than the thermometer position, the inhalation valve should be closed before the asphalt pump is stopped to prevent the asphalt return in the heater.Before using it again, start the motor first, and then open the three -way valves. In order to save the security of fuel and equipment, please add less coal, often add coal, and remove ash at any time.
4. Construction is mainly used in road construction, and it will produce more dirt during application.At this time, we can use diesel for cleaning. The thickness of thickness can be cleaned by physical methods first, and then the diesel is washed.The cave library initiates a ventilation system when sucking the bottom oil to ensure the ventilation of the workplace.When cleaning up the dirt of the asphalt tank, it is easy to occur, and it is necessary to do a good job of protection.
5. Secondly, according to various technical indicators of construction, the upper limit or lower limit cannot be exceeded during the use process.The production capacity of the equipment should meet the needs of continuous production of the mixing equipment; the less heating the equipment at the same time, the less the amount of asphalt; the better;

Related News
Read More >>
Pipe connection method of air Pipe connection method of air
06 .18.2024
Air suspension fans are efficient, environmentally friendly ventilation equipmen
Installation and debugging of Installation and debugging of
06 .18.2024
Before installation: Before installation, first prepare the materials and tools
Advantages and adjustment meth Advantages and adjustment meth
06 .18.2024
A centrifugal fan is a mechanical device that relies on input mechanical energy
How to debug a centrifugal cur How to debug a centrifugal cur
06 .30.2024
The debugging of the centrifugal curtain machine mainly includes the following s

Leave Your Message