Tall space heating is applied to tall places such as tall factories, warehouses, locomotive maintenance centers, logistics centers, stadiums, exhibition halls, car 4S shops, large supermarkets, etc.Its system has solved a variety of needs such as heating, refrigeration and ventilation of high space. It is suitable for tall buildings with more than 5 meters. It is a solution of mature, simple installation, and flexible control.
The installation points of tall space heater include:
1. Make sure the technical information of the bracket load: Before installation, you must check the bearing technical information of the bracket to ensure the safe installation of the heater.
2. Wall installation location: If the high space heater is installed on the wall, the placement position must be 1.8 meters away from the ground.At the same time, the distance between the heater, the ceiling and the side wall should be less than 20 cm.
3. Preparation before installation: Before installation, first fix the bracket on the wall and then place the heater.Please note that the high space heaters must not be close to the wall, because close to the wall will hinder the flow of air flow and easily cause fire.
4. Keep a safe distance: During the installation process, high space heater and surrounding objects should maintain a certain safe distance to prevent accidents.
5. Considering the heating effect: In order to make the heating effect of the high space obvious, the warranty measures are crucial.Refrigeration is the same principle. If you want to achieve a good refrigeration effect, the key problem is to reduce the cold load, not to increase the unit.The effective method of reducing the effectiveness of cold burden is to use internal shading and outer shading.
6. Pay attention to ventilation and fire protection design: Due to the dependence of the gas of the high space heating unit, the design requirements for ventilation and fire protection in architectural design are higher than ordinary buildings.Ventilation needs to be set according to the specifications, and correspondingly combustible gas testing alarms and other devices.At the same time, the ventilator needs to be designed as an explosion -proof fan, and switches are set up in the place where indoor and outdoor can be easily opened.
Following the above points, it can effectively ensure the correct and safe installation of high space heater, and ensure that it can play a good heating effect during use.For more information, it is recommended to consult relevant experts or consult professional books on HVAC.