The new hot recovery new group is a kind of air regulation equipment that provides fresh air.The function can meet the constant temperature and humidity according to the requirements of the use environment or provide fresh air simply.The working principle of the full thermal recycling group is to extract fresh air from outdoors to pass the departure, dehumidification (or humidification), cooling (or heating), etc. After being sent to the room, replace the original air in the indoor space when entering the indoor space.Of course, the functions mentioned above must be determined according to the needs of the use environment. The higher the function, the higher the cost.
The full thermal recycling fresh air unit is the equipment that directly filter, adjust the temperature, and adjust the outdoor air to the equipment in the room. Using the full thermal recycling fresh air crew can keep the indoor air pressure higher than the outdoor, always in a positive pressure state.Some special places or places with high requirements for new air volume; since the full thermal recycling fresh air unit is to directly handle high -temperature air outdoors, the selection of key components such as the evaporator, condenser, compressor and other air conditioners will be relatively large.High, the price is more expensive.
The mid -section (maintenance section) of the full thermal recycling new air unit has the connection and the internal maintenance and lighting of the full thermal recycling fresh air unit.In front of the filtering section, the full thermal recycling fresh air unit must be set up in the middle section before and after the heating section, heating section, and the sound disappearance., Electric or pneumatic regulatory agencies are selected by users. The full thermal recycling fresh air unit can also be separated in the air supply.
The cooler cooler uses the structure of aluminum foil in the copper pipes of the 4, 6, and eight rows of tubes. The aluminum foil of the fresh air unit of the fresh air unit is a double -flip ripple edge.The heat exchange power is improved, the mechanical uplook forms ensure the contact performance of the thermal exchanger, and the full thermal recycling fresh air unit.The unit uses steam or hot water.