Tall space heating units are a device for heating. Daily maintenance is required during use to ensure its normal operation and extending its life.This article will introduce the daily maintenance of the high space heating unit in detail.
1. Clean thermal switch
The heat exchanger is an important part of the high space heating unit, which is responsible for conveying thermal energy.During the long period of operation, a large amount of dust and debris may accumulate in the inner wall of the heat exchange device, which hinders the heat transfer.Therefore, regular cleaning heat exchangers are necessary.Under normal circumstances, it can be cleaned once a quarter.
Specific cleaning method: First turn off the heat exchanger in and out of the water valve, open the cleaning port on the side of the heat exchanger, and use water to completely rinse the internal heat exchanger.If necessary, use a cleaner and clean it as required as required.
2. Check water treatment
During the use of high space heating units, water treatment is also a matter of attention.Excessive water quality or too soft will cause damage to the equipment.During the use of use, regular inspection should be checked and replaced in time.At the same time, stainless steel filters can also be installed at the water inlet pipeline, and impurities such as the sediment in the dangling water can be filtered to ensure that the fluid is cleaned.
3. Replace the filter regularly
Filter is an important protection measure to prevent dust and debris from entering high space heating units.After long -term use, the filter will gradually accumulate dust and debris, and new filters must be replaced in time.Under normal circumstances, the filter is recommended once a quarter.
4. Check the electrical system
The electrical system of the high space heating unit is an important control system for mechanical operation. It is very important to check the task regularly.When checking, you need to pay attention to whether there is a loose and off electrical element to check the normal working state of the component, such as whether the capacitor is charged and the wiring is standardized to ensure the normal work of the electrical system.
5. Replace the protection installation
Protective installation is an important protection measure for high -space heating units to prevent overheating and over -current failure. It needs to be replaced in daily maintenance.Regular inspections should be checked or repaired or replaced by faults.
6. Check the cooling water system
The cooling water system of the high space heating unit determines the efficiency and life of its operation.During the use process, the water tank, water level, cooling water pipe road, etc. should be checked regularly to ensure that the cooling water is sufficient and prevent the rubber plate from being damaged and damaged.