Frequently placed on the roof or outdoor of high -rise buildings.Due to long -term use, there will be some dust and dirt on smoke.But few people are cleaned in daily use.Although cleaning is very inconvenient, we should often clean and maintain daily cleaning, which can extend the service life of 3C.Lets understand daily cleaning and maintenance based on the manufacturers introduction.
Break the main power supply, hang the prohibited closing signs, and check whether the motor ground wire is good.First of all, you must adjust the tightness of the belt used in the 3C fan, and use the hand disk to move the wind wheel to investigate whether the changes are stable.
The 3C fan should fill the lubricating oil at the conversion site to ensure the sensitivity and stability of the coupling and bearings.Filter and inside of the shell.Swipe places where the paint drops.
3C fan check whether the opening and closing action of the 3C fire valve is firm and sensitive, and the opening and closing point of the opening and closing is clear.The 3C fan inspection and replacement of the pads and sealing fillers between each co -surface must be added to the addition of these pads and sealing fillers.
3C fan can be started manually, check the indicator light, current, and voltage meter is normal, check whether there are abnormal sounds in each component of the fan, and whether the three -phase current value is balanced.
Check whether the mechanical opening and closing action of the regulating valve is reliable and flexible, and the angle of the open and closing angle is clear.Manually start checking indicator lights, whether the current is working properly, whether there are abnormal noise in each component of the 3C fan, and whether the three -phase current value is balanced.
Check whether the internal parts of the remote control point control box are normal.The daily cleaning and maintenance of the 3C fan can not only ensure the normal operation of the equipment, but also extend the service life of the equipment.