The installation of HTF fire smoke needs to be paid attention to:
1. Freshly familiar with the specifications, forms, leaf rotation directions, and airflow direction of air flow, etc. to ensure that the installation is correct.
2. Check whether the leaf wheels are touched, and check the components comprehensively. Whether the attachment is complete and whether each component connection is solid. Careful check whether the wind leaves are damaged or deformed due to transportation, otherwise it should be installed after repair.
3. The ducts that connect the fan inlet and export should have a separate support, and the weight of the pipeline should be added to the component of the fan. When installing the fan, pay attention to the horizontal position of the fan.It should be adjusted to make it natural, and it is not forcibly connected.
4. After installation, pull the impeller by hand or leverage to check whether there is too tight or rubbing, and there is an item that does not hinder rotation.
5. The wind turbine wiring must be correct and reliable, the fan shell should be properly grounded, and the ground must be reliable.The power supply supply to the smoke exhaust fan must be complete and meet the relevant requirements.Electric wiring must have electrical wiring with professional knowledge.
6. After the fan is installed, the trial movement should be performed. The exposed part of the wind opportunity should have a protective cover.If the air inlet of the fan does not connect to the pipeline, the protective network or other security devices need to be added.