The production of this product is directly related to its quality problem, so the production and operation of asphalt tanks are very important.Lets take a look at the production and operation guide of asphalt heating tanks.
1. After the asphalt tank is installed in place, please check whether the connection of each part is firm, close, whether the operating parts are flexible, whether the pipeline is smooth, and whether the power connection is correct.
2. It is the asphalt heating tank first filled as asphalt.Please open the exhaust valve to enable the asphalt to enter the heater smoothly.
3. Before igniting the asphalt tank, fill the water tank full of water, open the valve, so that the water level in the steam generator reaches a certain height and close the valve.
4. During the operation of the asphalt heating tank, pay attention to the water level, adjust the valve, and keep the water level in a proper position.
5. When the asphalt liquid surface of the asphalt heating tank is lower than the thermometer position, close the inhalation valve before stopping asphalt heating tanks to prevent the asphalt from the heater.