Precautions for the installation of shaft flow fire smoke
1. Install the comprehensive inspection of each component, whether the parts are complete, and whether each component connection is tight.
2. There should be rain prevention measures on the open day.
3. If abnormal phenomena such as a violent vibration impact are found during operation, it must be stopped immediately.
4. Remove the internal ash, dirt and other impurities such as ash and dirt in the shaft flow fire exhaust fan on schedule, and prevent rust.
5. When installing, pay attention to maintaining the horizontal position of the fan. The combination of the fan and the foundation and the connection of the air outlet pipe should be adjusted to make it natural that there must be no forced connection. The weight of the pipeline should not be added to the fan component.
The installation and badness can be directly related to the efficiency of the fan, so you must not loosen the installation in this regard. Dont think it is simple. In fact, it will seriously affect the later work.
Shaxian Fire Fighting Tobacco Fan Maintenance Method
Surgery: regular cleaning the appearance of a shaft flow fire fan can increase its beauty and extend the service life.Specific operations include removing the fan cover, remove the blanket blades, accept the dust and draw out dust and dirt, wipe the blankets and shells, fan bearings, etc. with a wet cloth, remove the dust and oil stains, and then install it.The appearance can be cleaned once a quarter.
Bearing lubrication: Bearing is the key part of the smoke exhaust fan, which affects its service life and efficiency.In order to maintain the bearing lubrication, the bearings should be cleaned regularly and an appropriate amount of lubricant should be added.
Clean up filter: During the maintenance process, it is necessary to regularly clean up the shaft -type fire fire exhaust fan and dusty debris in the pipeline, so as not to affect the normal use of the axial flow fire exhaust fan.
Check the fastener: Check and fasten all the loose bolts and nuts to prevent leakage and vibration.
Check the motor: Check the insulation resistance between the motor winding and the case, and whether the connection of the power cord is firm.
The above is the precautions and maintenance methods of the installation of shaft flow fire exhaust fan