When the color asphalt level in the asphalt tank is lower than the ingredients indicated by the temperature table, the asphalt pump needs to be closed and the tight suction valve is closed before the asphalt pump is terminated to avoid the color asphalt in the electric heater.
After 2 days, start the motor first, and then quickly open the three -way valve.When the colored asphalt is added for the first time, the automatic exhaust valve should be opened quickly to make the color asphalt enter the electric heater smoothly.
Before fireing, the water storage tank should be filled with oil and water, and the valve should be opened quickly, so that the water level line in the water steam generator reaches a special high and width ratio.At the same time, the valve should be closed tightly.
During the running process, the machine and equipment need to observe the water position and adjust the valve at all times to maintain the proper liquid level.If the color asphalt contains water, it is necessary to quickly open the pouring top pores when the heat reaches about 100 ° C, and take off the inner ring back in the work.
The asphalt tank can independently manipulate the heat of the modified material emulsion asphalt. The new CNC processing technology is used to recognize the heat of the modified material in the tank, and immediately emphasize the heat to regulate the heat of the litter in the tank to automatically control the system.
There is a loop setting in the tank, which can realize the functions of fully automatic drying and automatic temperature reduction.In addition, the style of the tanks can meet the different needs of different users, so that the use of color asphalt tanks is becoming more and more extensive.
On the assembly line of the machine and equipment, you need to check whether the interface is stable and tight, whether the product is lightweight, safe, and whether the power connection is stable.When the color asphalt assembly line is carried out, the automatic exhaust valve should be quickly opened to make the color asphalt enter the electric heater smoothly.
Before fire, you should fill the oil and water tank and quickly open the valve to achieve a special high and width ratio in the water level in the water steam generator.In addition, the valve should be closed.
In short, the operation steps of the color asphalt can need to be carried out strictly in accordance with the process to ensure the safety and normal operation of the asphalt can.
The above is the introduction of the precautions and characteristics of the colored asphalt tank operation. I hope that the above content can be helpful to everyone. Thank you for watching and support. In the later period, more information will be sorted out. Please pay more attention to us ——