The installation steps of hot water are as follows:
1. Prepare tools and materials: You need to prepare installation tools, expansion screws, electric diamonds, insulation cotton, wrenches, horizontal ruler, right angle ruler, wire connection, etc.
2. Determine the installation location: Select a suitable installation location. It is generally recommended to install it in the center of the room to avoid being installed near the items to ensure safety.Pay attention to stability, the heater should be installed on the wall structure.
3. Install the body: Install the body to the predetermined location to ensure that the body is stable, and then fix the body with a expansion screw.
4. Connector wire: Connect the wire according to the instructions, pay attention to the length and connection method of the wire to ensure that the connection is firm.
5. Install the air outlet: Install the air outlet on the body, pay attention to the sealing of the air outlet and the body to avoid leakage.
6. Install temperature controller: Install the temperature controller according to the instructions to ensure the connection with the body.
7. Check the installation situation: Check whether the installation is firm and reliable to ensure that there is no loose or shaking place.
8. Power -powered testing: Whether the power -on testing equipment is working properly, if there are abnormal conditions, deal with it in a timely manner.
During the installation process, you need to pay attention to the following:
1. Check the integrity of the heater before installation to avoid safety problems after installation.
2. A circular hot water pump should be installed on the water pipeline of the hot water heaters to ensure the circulation of the hot water.
3. The motor wiring should make the fan impeller rotate in the direction of rotation signs.
4. Before use, you should carefully check the tightness of each connection. If there are loosening, it should be tight immediately.
5. Before each work, arrange the mixed gas in the heat sink, and preheat for 5-10 minutes before sending the wind.
Follow the above steps and precautions to ensure the correct installation and use of hot water heater.
The above is the installation method of hot water heaters