When installing the side wall, you need to follow certain steps and precautions to ensure its safe, stable and effective operation.Here are detailed installation steps and precautions:
1. Preparation before installation
1. Determine the installation position: Select a position that is good at ventilated and closer to the target exhaust area to ensure that the wall fan can cover the entire area.At the same time, avoid being installed in direct sunlight or high temperature to avoid affecting equipment performance.
2. Preparation tools and materials: According to the types and specifications of the wall fan, prepare the necessary installation tools and materials, such as electric drills, screwdrivers, wrenches, ventilation pipes, seal tapes, wires, etc.
2. Installation steps
1. Fixed fan:
Use embedded nuts or expansion bolts to fix the wall fan on the wall.Make sure the fan is well installed and will not shake.
If you need to install the foundation, first punch the installation position, and then fix the foundation on the ground with a screw.
2. Connect the ventilation pipeline:
Connect the wall fan to the ventilation pipeline.Pay attention to the direction of the ventilation pipeline and the tightness of the connection to ensure that there is no air leakage.
Use sealed tape or other sealing materials to ensure that the pipeline connection is well sealed.
3. Connect the power:
Connect the power cable of the side wall fan to the power supply and ensure that the wire is firmly connected.
Follow the local electrical safety regulations to ensure that the power connection is correct.
4. Adjust the direction of the fan:
According to the direction of ventilation, adjust the direction of the wind turbine.
Pay attention to avoid the damage or failure of the fan due to operational errors.
3. Check and debugging after installation
1. Check the installation situation: Check whether the installation of the fan and ventilation pipes is firm to ensure that there is no loose or shaking phenomenon.
2. Check the impeller: Make sure that the impeller of the fan rotates smoothly, without abnormal conditions such as stuttering and overlapping.
3. Debug the fan performance: Open the power switch to check whether the wall fan is running normally.If abnormal conditions are found, power off and check the equipment in time.
Fourth, precautions
1. Follow the safety regulations: During the installation process, we must follow relevant safety regulations to ensure the safety of themselves and others.
2. Select the right installation position: Select a good ventilation and sturdy wall for installation to avoid being installed in direct sunlight or high temperature.
3. Pay attention to sealing: Make sure that the connection of the ventilation pipeline is well sealed and prevent air leakage.
4. Check the wire connection: Make sure the power cord connection is firm and follow the electrical safety regulations.
The above is the correct installation of the side wall fan