Frequent failures and solutions
Today, lets talk about problems and solutions that are prone to occur during the usual use process!Frequent failures and solutions of heater
1. Fault phenomenon: The electrical appliances are not hot, only the air changing fan is working
Maintenance: The switch is not placed on the heating settings; the temperature regulator operation; non -self -reset and cutting operation.
Solution: Adjust the position of the switch on the heating settings; rotate the temperature regulator to listen to whether there is no sound to open or turn off.If there is no click, the thermostat will not be damaged.When the electrical appliances are cooled, the electric heater will automatically turn on; disconnect the power, insert the rod directly into the reset hole on the control panel, press the reset button to connect the circuit.
Today, lets talk about problems and solutions that are prone to occur during the usual use process!Frequent failures and solutions of heater
2. Failure phenomenon: Heating element glow
Maintenance: The light emitting of the heating element may be caused by the input voltage too high or too low; the air entering the grille is blocked.
Solution: Use relevant operation descriptions correctly; keep electric heaters away from objects that are easy to cover the air inlets such as curtains, plastic bags, and paper.
3. Failure phenomenon: Far infrared heater does not work after power -on.
Maintenance: Check whether the power plug of the machine is inserted, whether the safety switch is well exposed, whether the internal leader of the machine is off welding or falling off, whether the fuse is too hot and burned, etc. Otherwise, all machines will not work, that is, the upper and lower tube will not be bright, the fan motor will not be bright, the fan motor will beNot working.
Solution: Unplug the plug, check the connection of the plug and the socket, and then connect again.Insert the plug into the appropriate socket.