The address environment of the air curtain machine is 40 ° C at high temperature, low temperature -10 ° C, no vibration, impact, water droplets splash or full of steam, no corrosive gas, conductive medium, or explosion hazard media in the medium.
1. The machine should be installed when there is no vibration effect (otherwise it will cause vibration or noise to increase and damage parts).
2. This machine should be installed in the inside of the door.
3. The height of this machine (useful distance from the ground) is 2-3 meters.
4. The lower end of the air spray exit is roughly the same as the lower end of the door frame.
5. The door width is larger than the captain can use two or more parallel devices at the same time, and the time between each air curtain machine is kept between 20-40mm.
6. There should be no time between the wind curtain machine and the wall.
7. Generally, a total of 1500 hours should be carried out.
8. Cut off the power before cleaning the machine.
9. When sorting out the PTCR heating board, please use a soft brush water or vacuum cleaner to clean the heat sink and protect the net to avoid short circuit.
10. Do not use gasoline, fire oil, diluent and other cleaning machines.
The above is the technical knowledge related to the curtain machine. If you want to know more information, please follow us.