Fire fire smoke should have independent stents.Fire ventilation equipment parts must not be loaded on the pipeline.When installing a hood, pay attention to the adjustment of the horizontal position basis with the connection connection, and you must not be forcibly connected.
There is a comprehensive understanding of the standardization, shape, rotation direction, and direction of the firefighting fan in fire discharge fan.Before installation, check whether the impeller is worn, check all parts, and pay attention to the damage and deformation of the leaves during transportation.
Pay special attention to installing cables.The wiring of fire foam fan should be correct, reliable, good, the ground of the wind turbine is reliable, the fan power supply is complete, and the requirements of the prescribed regulations should be fully complied with the requirements.related requirements.
When installing a fire fire fan, the fan and bracket should always be smooth with the ground.After the installation, check whether it is excessively stretched or rubbed by rotating the leaf wheel.There is no abnormalities before starting and debugging, and it is necessary to check whether the environment is tight.If there is a gap, you can use solar panels or glass glue.
In particular, it is necessary to pay attention to the height of the installation base of the smoke exhaust fan of 400mm-500mm to reduce the scouring of rainwater, extend the life of the equipment, and add a vibration rubber pad between the equipment base.Reserve base sound insulation effect.
The above is the precautions for the installation of fire exhaust fan