1. The components that must be cleaned when cleaning the air heater: the surface, internal, one -time heater, medium -effect filter heater, and its heater replacement.
2. Cleaning of gas heater: towels, stainless steel sinks, cleaning solution and stainless steel frame.
3. The air heater development standard: The final resistance coefficient of the heater of the initial and medium -efficiency filter exceeds 2 times the resistance coefficient of the initial friction.
4. Cleaning of air heater:
(1) Cleaning method of medium -efficiency filter heater
When the surface of the air heater is not too dirty, remove the heater, and use the cleaned air to compress the two sides of the sides of the sides of it, and blow it until the light without floating dust particles.Because the surface of the heater is very dirty, it must be cleaned.Put the water in the ordinary water house, put the heater into the stainless steel sink, and let all the water penetrate into the water and wash it many times until it is cleaned.On the frame, it is irritable at the ventilation, and often rotates on both sides to accelerate the rate of dryness.
(2) The surface of the generator set
A. Daily use towels to clean up the development trend of social development in the exterior surface of the air -conditioning unit and the technical development of pipes, and the technical development of the instrument panel, and promote the cleansing and light of the companys machine and equipment.
b. Wipe the oil and powerful glue on the machine and equipment to wipe it tidy, and then wipe it with water with water.
(3) Cleaning internally
After each replacement and medium -efficiency filter heater, the inside wall walls, air heater, and diversion of the refrigeration unit should be completely cleaned, and the dust, waste, and oil traces are cleaned, and then installed again, again, medium, and mediumEffect filter heater.Clean up the system software every half a month.First wipe the inside with a wet towel, and then use dry towels to clean up in various aspects.
(4) The replacement of the heater
When replacing, the installed air heater should be wiped out and clean outside. After wiping, the air heater should be installed immediately.
5. Frequent problems with gas heater cleaning:
(1) After the filter cloth is cleaned, if the initial resistance value of the filter cloth is less than that of the filter cloth, the initial resistance value is not applied when installing the application, and it should not be applied and should be replaced immediately.
(2) When using the air heater, the box should be lifted upside down, so that the rate and its heater should be carried out stably.
(3) After the air heater is carried out, it should check whether the trainees are damaged. If any, it should be replaced immediately. It is difficult to avoid rubbing when cleaning, nor can they be washed or removed.
(4) The original heater and material heater should not be mixed during the entire process of cleaning. Each air purification equipment should have a reserved heater, which is convenient for immediately replacing it to clean up.
With the improvement of air pollution and the improvement of the concept of natural environment, the air quality index has become a focus that everyone values.Now everyone knows the necessity of gas heater, so the use of gas heater is getting larger and larger, but everyone must remind everyone that in the process of application, pay special attention to the importance of cleaning.