◆ Water inlet temperature 1. GS -type hot water heating is hot media as the heat water, and the temperature of the hot water should be hot water with no less than 90 ° C.2. S type of hot and cold water heating. When the heat exchange with the heat media and the refrigerant, the temperature of the hot water should not be higher than 65 ° C. The refrigerant should use cold water with a water supply temperature of 6-15 ° C.Effective measures to prevent scaling should be prevented for the heat exchange effect during cold.3. When the cold exchangers supply and heating are set up separately, the heat media should use hot water not less than 90 ° C, and the refrigerant should use cold water at 6-15 ° C.◆ Water flow 1. The hot water flow with hot water heating type should make the water flow rate above 0.2m/s above the heat dissipation exhaust pipe, with the heat dissipation effect;The water flow rate in the exchange tube is more than 0.2m/s, for cooling and heating effects.◆ Inlet and out of the water pipe 1. GS -type hot water heating and S -shaped hot and cold water heating in and out of the water pipe should be the lower part of the water, the upper water out of the water (downward). The slope of the branch should be used.water.2. S -type hot and cold water heating should be set with condensed water drainage pipes.◆ Precautions for use 1. Before the warmth is started, check the tightness of each connection carefully. If there is a loose, it should be tightened immediately 2. The cooling water and mixed gas in the heat dissipation tube before use.After 5-10 minutes hot, send the wind.3. Check the heat sink and supply, the sealing of the drainage pipeline, and the flexibility of the adjustment devices, and deal with it in a timely manner.4. After stopping the work, the condensate in the net radiator should be placed in order to prevent freezing.5. In order to make the warm shooting reasonable, the open angle of the louver should be adjusted.
The above is the introduction of the installation and use of hot and cold water heater. I hope that the above content can help everyone. Thank you for watching and support. In the later period