The asphalt insulation tank makes up for the lack of heating time and high energy consumption of traditional thermal oil heating equipment.Local heater in the asphalt tank is suitable for asphalt storage and heating of transportation and municipal systems.
The electric heating asphalt can consists of a horizontal coal -fired straight thermal heating asphalt tank and one or two vertical storage tanks.The electric heating asphalt tank has improved the planning process for the shortcomings such as the low heat efficiency, high energy consumption, and slow heating of the traditional asphalt store.Dit the high -temperature flue gas occurred in the high -temperature tank coal -fired heating furnace into the stand -up storage tank, and heat the asphalt in the tank through the trail to enters the high -temperature tank from the high temperature tank.Temperature, the high -temperature tank and the vertical storage tank were carried out simultaneously. The reuse of the remaining high -temperature flue gas was used to use the heat energy, which greatly saved coal -fired.There are some heating equipment in the high -temperature tank and vertical storage tank. How much heating is completed and not spoiled, preventing asphalt to form aging due to repeated heating, and greatly shorten the heating time.
The electric heating asphalt can can be reduced by more than 55%according to the comparability equipment. The operator can be reduced to one person, saving more than 60%of the energy consumption, shortening to 45 minutes, the product configuration is the same as the horizontal type, the overall new high -efficiency energy -saving asphalt asphaltCan.The selection of modified emulsion asphalt equipment is necessary to satisfy the needs of continuous production of asphalt concrete mixing equipment. It is also necessary to prevent excessive capital capital, form a spoil, increase costs.
Electric heating asphalt tanks include GY-500, GY -000, GY-2000, etc., and the reserves are: 500 cubic meters, 1000 cubic meters, and 2000 cubic meters.The characteristics of emulsion asphalt equipment are: fast heating, energy saving, large output value, how much use, not waste, non -aging, convenient operation, all attachments are particularly convenient on the tank, movement, hanging, and repair.The heat asphalt at 160 degrees of this product generally does not exceed 30 minutes.The active cycle of emulsion asphalt equipment enables the asphalt to actively enter the heater, dust collector, induction fan, asphalt pump, asphalt temperature display, water level display, steam generator, pipeline and asphalt pump preheating system, pressure leakage system steam assistance system, Clear the tank system, the oil unloading of the tank equipment, etc., and all are not visible in the tank (inside) to form a compact integrated structure.It can also be planned according to user needs and venue planning and production of users requirements for various reserves and output values.
The above is the characteristics of electric heating asphalt tanks. I hope that the above content can be helpful to everyone. Thank you for your viewing and support. In the later period