The daily maintenance of fire fire exhaustion includes the following aspects:
1. Regular inspection: regular check whether the fuel storage of the fuel tank is lower than the low -engraving line. If the butter is not enough, then refuel it immediately.At the same time, it is necessary to prevent butter from entering the moisture and dirty things to cause the butter to deteriorate.If you find spoiled butter, you must replace it immediately.
2. Check the atmosphere filter: Check whether the atmosphere filter is very dirty. If it is dirty, you need to remove the atmosphere filter, spin the butterfly screw mother, take the lid, and clean the filter sponge.
3. Check the triangle belt: After the fan is running for a period of time, the triangle belt will expand a lot. At this time, you need to hurry up the generators flowing nut hat, move the generator, tighten the triangle to bring back the suitable place before the generator flowing snailsThe hat is tight.At the same time, pay attention to whether the end surface of the motor of the motor and the breeze transmission belt wheel is on the same three -dimensional. At the same time, you need to pay attention to whether the top screw of the following two transmission strap wheels is loose when reviewing. If you send it, you need to hurry up.
4. Daily inspection: The safety valve of the fire exhaust fan needs to be checked at any time to check the sensitive situation.
5. Adjustment and cleaning: Break the main power of the main power, hang the "prohibition of the gate" logo sign, and check whether the motor ground wire is good.Then adjust the tightness of the belt used by the fire exhaust fan, and use the hand disk to move the wind wheel to investigate whether the transition is stable.Then clean the motor and wind wheel, filter and inside the case.About the paint drop should be made up.
6. Lubrication: Fire firing fans to fill the transition site to add lubricating oil to ensure the sensitivity and stability of the joint bearing and bearing.
7. Manual boot inspection: Manually start checking the indicator light, voltage, and current meter work, whether there is any sound in the operation of each component of the fire exhaust fan, and whether the three -phase current value is balanced.
8. Check the opening and closing movement of the regulating valve: Check whether the mechanical opening and closing action of the regulating valve is reliable, and the angle of the flexible opening and closing angle is clear.
Fascination: Maintenance or replacement should be repaired in time for parts that have problems. The interface must be guaranteed to be tight, and fasteners such as screws should regularly check their tightness.
Departure work: Regularly clear the dust and debris inside and outside of the ventilator, especially for the flow tract part of the impeller and axial ventilation ventilator. The attached dust and debris should be often removed to ensure the smooth flow of air.
Anti -corrosion work: For ventilations exposed to corrosive environments, appropriate anticorrosive measures should be taken, such as coating anti -corruption coating and using corrosion -resistant materials.
Maintenance work: regularly maintain the ventilator, such as replacing lubricating oil, cleaning bearings, etc. to ensure its normal operation and extending the service life.
Safety protection: Pay attention to safety during maintenance and avoid accidental damage caused by improper operation.Especially when cleaning and repair, pay attention to prevent miscellaneous objects from falling into the fan or contacting the charging part.
The above is how the daily maintenance work of fire fire exhaust fan is effectively introduced. I hope it will be helpful to you.If you want to know more about related information, please pay more attention to us--