Installation location selection:
Do not install places where the heat source or bright fire, or where there may be phenomenon gas leakage.
Avoid high temperature and high humidity environments, and try to choose places with the smallest air duct length as much as possible to reduce the resistance of the pipeline.
Considering the problems of maintenance, filter replacement, running noise, and inhaling air quality, the installation of the host should avoid restaurants such as living rooms and bedrooms.
The outdoor host and indoor ventilation outlet and pipeline installation require a certain operating space. At the same time, the inspection mouth is reserved in front of the host or above the ceiling.
Pipe installing:
The pipeline wiring can choose the tube of the top or underground, the pipelines that are sent to the wind, and the pipelines of the ground air supply use the flat pipe.
The pipeline installation should be horizontal and vertical, and the horizontal degree should be guaranteed as much as possible, and there are not too much errors.
Try to avoid straight -angle installation as much as possible. The connecting pipe can use Y -shaped oblique three links, or use two 45 -degree elbows to transition smoothly.
The inner diameter of the pipe should be cleaned without debris, and the pipes connected to the outdoor side shall be tilted outdoors to prevent the rainwater from entering.
The pipeline joints should be treated with the leakage problem, and a dedicated glue can be used to connect the pipeline.
Installation of air mouth and switch:
The air inlet and duct connection should be closed, and the distance between the inlet and outlet should not be too close, avoiding the fresh air from being discharged immediately.
The fresh air controller switch should be installed after the wall process is completed, and the location arrangement should be reasonable.
Special parts installation:
At the connection between the host and the pipeline, the security can be used to reduce the noise.
When installing the outlet out of the air outlet, the distance between the two air outlets should be ensured at a certain distance. At the same time, the rain cover should be fixed.
Understand the wall structure:
During the installation process, pipeline punching is involved, and it is necessary to understand whether the wall structure is safe.
In addition, the installation of the freshwake processing unit cannot be carried out by itself, and the sales store or professional installation company should be commissioned to ensure the quality and safety of the installation.
In summary, the installation of the fresh air processing unit involves multiple details. It is necessary to comprehensively consider the installation of locations, pipelines, air outlets, switches, and special components, and ensure that the installation process meets the safety specifications.Correct installation can ensure the normal operation and efficient performance of the fresh air processing unit.
The above is the details that need attention during the installation of the fresh air processing unit