The blockage will directly affect the operation of the entire mechanical process, so its maintenance is very important. Next, Texas manufacturers will specifically introduce the daily maintenance of the lower axis flow.The first is the inspection of the lubrication system: 1. Check whether the amount of oil storage in the fuel tank is lower than the lower carrier line. If the oil is insufficient, please refuel.2. Check whether the oil is mixed with dirt and other dirt and deteriorate. If the quality is changed, please replace the oil in time.3. Daily cleaning oil filter.4. Check whether the oil dripping of the dripping mouth is normal. If the dripping mouth is dirty, you can remove and adjust the nail.Then, the air filter checks the daily inspection of the air filter is dirty.If you are dirty, you can remove the air filter, spin the butterfly nut, take the lid, and clean the filter sponge.However, be careful not to drop the dirt into the host when removing the filter.Secondly, after the inspection of the triangular band runs for a period of time, the triangular belt will extend.At this time, the fixed bolt of the motor should be loosen, the motor is moved, tighten the triangle to the appropriate position, and then the motor fixed bolt is tightly held. Note that the end surface of the motor belt wheel and the belt wheel should be on the same plane.At the same time, check whether the top screws of the two belt wheels are loosened. Please stop.Third, the flexible status of the safety valve is inspected. If not flexible, please clean up and debug to ensure reliable opening and closing.Finally, it is to check the part of the oil leakage and air leakage and repair it. If you cannot repair it, please immediately notify the manufacturer.Clean up the house, keep it clean, and ventilate well.Regular inspections and the operating conditions of the motor.Only by doing the daily maintenance of the axis flow can the mechanical performance of the axis flow be maintained. Although they are all routinely checked, they can extend the performance from the grassroots level and exert their better performance.
The above is the daily maintenance of the axis streaming machine lubrication system. I hope that the above content can be helpful to everyone. Thank you for watching and support. In the later period, more information will be sorted out. Please pay more attention to us.