Frequent heating is a device that can emit warm air, which can bring fresh air convection and increase temperature for the breeding environment.However, the dust in the air will be attached to the leaves, which will inevitably hinder the airflow, thereby reducing the volume and efficiency of the air to cause excessive vibration.In order for everyone to use it better, today I will introduce the places that need to pay attention to the breeding heating during the use process:
1. The fuel used by the heater is diesel or kerosene.No fuels other than diesel or kerosene, otherwise it may cause damage, equipment scrap, fire and other problems.
2. Use different varieties of fuel oil according to the changes in the ambient temperature. Long -term use can also be installed with fuel heater to ensure the normal operation of the aquaculture hotter.
3. For direct combustion equipment, the room must be ventilated to ensure the sufficient supply of oxygen and exhaust in the room, otherwise it may lead to hypoxia, suffocation and severe carbon monoxide poisoning.
4. Please do not unplug the power plug immediately after the device is turned off.The correct approach is to wait for the device to automatically heat dissipation for about 3-5 minutes after the device is shut down, and then unplug the power plug after stopping the device.
5. When the device needs to move during the operation, it must be moved smoothly to the operating place to avoid the large fluctuations in the fuel in the fuel tank, resulting in unstable oil supply, flameout, and damage to combustion parts.
6, without permission, must not be disassembled, modified or repaired.Unless the manufacturers authorization and guidance are performed, danger may occur, and the manufacturer is not responsible for any consequences.
7. Breeding heater is a dangerous product, and children, disabled people, etc. are prohibited from contact.Equipment managers need to train equipment to a certain extent to use them safely.
8. When refueling, turn it off first, and then turn on the fuel tank cover after the heater is shut down.Do not remove the filter when transporting fuel.When the fuel is filled, the fuel tank cover is tightened to avoid leakage and regularly check the remaining fuel in the fuel tank to avoid exhaustion of the fuel.
9. The temperature of the air outlet of the heater is very high, especially the high temperature inside the burning room reaches 800 degrees Celsius. Therefore, standing 2 meters in front of the air outlet is prohibited from standing, and flammable items are prohibited 10 meters before the equipment.The rear part of the device should keep a distance of 50 cm from the object to ensure smooth air.
The above is the precautions for the use of aquaculture hotter. I hope it can help you. For more relevant information, please pay more attention to us- ——