How to turn on the warm closed control
The heater is mainly used in some industrial venues, such as workshops and factories.Its main purpose is to heat some workshops and factories that need to maintain a certain temperature, and can also be used to dry some industrial products.Thermal aircraft workshop is a combination unit of heating air, composed of motors and radiator.Suitable for various workshops that allow air recycled air.When the air does not contain dust or abundant gas, it can be heated as circulating air.
The heating machine heating is the process of transforming electrical energy into heat. It is an excellent electric heating equipment for the gaseous medium of heating, heat preservation and heating flow.When the heating medium is in stress, it is heated by the electric heater, and the huge heat generated during the operation of the electric heating element is taken away through the thermodynamic principle, so that the temperature of the heating medium can meet the users technical requirements.
When working, the low -temperature fluid media enters its input port through the pipeline under pressure, and uses the pipeline to enter its input port. Using the principle of fluid thermodynamics, high temperature heat generated by electric heating components is taken along the specific thermal exchange flow path inside the electric heating container, so that the heatingThe temperature of the medium is rising, and the high temperature medium required to obtain the process at the exit of the electric heater.
The internal control system inside the electric heating heating fan automatically regulates the output power of the heating heater according to the temperature sensor signal of the output port, so that the medium temperature of the output port is uniform.When the heating element is over -temperature, the overheating protection device of the heating element immediately cuts off the heating power to avoid the coke, deterioration, and carbonization caused by the heating material over temperature.
1. Place the heater vertically on the solid surface, stay away from the humid environment and flammable materials.
2. Open the power.
3. Adjust the temperature control to large and let the heater run at the power.
4. After the gear power switch is adjusted to the required gear, the heater will run at the set power.
5. Once the room temperature reaches the required level, the heating element of the heater will stop working, but the fan will continue to work.Once the air temperature decreases, heating elements will continue to heat.
6. The heater will automatically start and stop to keep the indoor temperature constant.
7. Before turning off the heater, turn the temperature regulator to smaller and turn off, and turn the gear switch to the fan or turn off. The heater will be condensed within 2 minutes.
After reading the above content, if you have any other questions about the shutdown control operation steps of the heater, please contact us. We look forward to reaching cooperation with you.
Border wall explosion -proof shaft flow fan rainfall and insect -proof edge wall fan
Tall space ceiling air -conditioner small vibration and small use safety reliability high
Tall space ceiling air -conditioning unit work efficiency high maintenance costs are low
Tall space air -conditioning units of air circulating heat -making unit running stable wireless control
Tall space warm and warm units Low warm wind crew warehouse plant heating and refrigeration equipment
Tall space dedicated circular air and hot and cold units operate steadily, energy saving low -carbon quality high
Wall -style exhaust lane aluminum -style wall fan square wall stroke fan
The side wall of the side wall is strong, thick, material integrated molding