The installation steps of the hot and cold units of tall space are as follows:
Determine the installation location: According to the building structure and design requirements, the location of the high space hot and cold units is determined.Generally, the unit should be installed on an indoors or outdoor wall to ensure that there is enough space for air circulation and maintenance.
Installation foundation: Design and install the foundation according to the size and weight of the unit.The foundation should be able to withstand the weight and vibration of the unit to ensure the stability of the unit.
Connect the power supply and pipeline: connect the power cord to the unit, and ensure that the power supply is safe and reliable.At the same time, according to the design requirements, connect the hot and cold water pipelines to ensure that the pipeline connection is firm and good.
Installation crew: Install the hot and cold units of the high space on the basis to ensure that the unit and the foundation are firmly connected.According to the needs, adjust the angle and location of the unit to ensure the normal operation of the unit.
Debugging and testing: After the installation is completed, debug and test the high space hot and cold units.Check the operating status, refrigeration/heating effect, noise and other indicators to ensure that the unit runs normally.
It should be noted that the installation of the high space hot and cold units requires professional technicians to operate to ensure the quality and safety of installation.At the same time, during the installation process, relevant specifications and standards should be observed to ensure the normal operation and service life of the unit.
The above is the introduction of how to install the hot and cold units of the tall space. I hope it will be helpful to you.If you want to know more about related information, please pay more attention to us--