The installation and application of high space heating crews in the production workshop generally common problems.Tall space heating crews are mainly used for some industrial production places, such as production workshops and processing plants.The key main purpose of its key is that a production workshop and processing plant that must be kept in the temperature must continue to maintain the temperature. It can also be used to dry some industrial products.Electric heating is an automatic control system for the combination of air quality in the warm room, which consists of engine and heat pipe heat dissipation.It is more suitable for various types of production workshops that allow recovery and then use indoor air quality.When the air does not include the concentration of the smoke or gas, the quality of the air indoor air is heated as the air.
1. Before installing and applying, further ensure the database safety of the large -space heating unit in conventional body inspection.The smoke exhaust fan should have a relatively response pipeline machine and equipment. Institute, intelligent and intelligent and intelligent water return sewage discharge pipes should be installed and applied to the application truncated valve. All pipeline machine equipment should be installed with gas liquid separators.If the inlet of the smoke exhaust fan can immediately be connected to the outdoor, a blocking automatic control system should be installed at the outdoor air inlet to prevent the thermal chemicals from being condensed and frozen when the input is stopped.
2. When the motor of the high space heating unit is connected to the switching power supply circuit, the centrifugal impeller should be flipped according to the direction of the machine equipment.The pipeline machine and equipment of the smoke exhaust fan must be cleared, and it can be connected with the electric heaters after clearing.One water storage valve should be installed under each smoke exhaust fan.In order to better better benefit the flowing water of each smoke exhaust fan in the machine and equipment, it is more functional to write machinery and equipment.Before applying, it is necessary to discharge the strong cold air in the pipeline machine equipment and heat pipe heat dissipation pipes.
3. The boiling water temperature of the high space heating unit is generally above 85, and the lower temperature cannot be less than eighty.The flow rate of boiling water must make the water flow in the heat pipe radiator tube can be used above 0.2m/s.Adjust the interpretation of the shutters to obtain a more suitable auto body liquidity.
The above is the precautions for installation of the high space heating unit. I hope it will be helpful to you.If you want to know more about related information, please pay more attention to us--