Warm manufacturers remind: If there is abnormal situations, such as odor, smoke, leakage, etc., you should stop using it immediately and contact professionals in time for maintenance.
Check the plug and wire of the industrial heater, which can be performed according to the following steps:
Power cutting: Before checking, we must first ensure that the heater has been disconnected to avoid the risk of electric shock.You can unplug the plug or turn off the corresponding power switch.
Check the plug: carefully observe the appearance of the plug to see if there are signs of burnt, deformation, cracks or looseness.At the same time, check whether the metal part of the plug is clean, rusty, and no bend or damaged.
Check the wire: Check it carefully along the wire to see if it is damaged, aging, or crack.Pay special attention to the connection between the wire and the plug, and where the wires are often bent or rubbed, these places are more prone to damage.If the wire is found to be damaged or aged, it should be replaced in time.
Pull test: Gently pull the connection between the wire and the plug to check whether there is a loose or falling off.If the connection is not firm, it should be processed or replaced in time.
Testing instruments: If possible, you can use professional test instruments, such as pressure -resistant tester, insulation resistance tester, etc., to detect more comprehensive detection of plugs and wires.These instruments can detect the insulation performance of the wires, pressure resistance, etc. to ensure the safety of use.
If any problems are found during the inspection process, you should contact the professionals in time for maintenance or replacement.At the same time, in order to prevent safety issues such as leakage, it is recommended to check the plugs and wires of the heater regularly to ensure that it is in a good working state.