Kitchen air -changing fan is the most commonly used ventilation item in the kitchen, especially when cooking.How should the kitchen air change fan be installed?
The kitchen air -changing fan can not only solve the problem of sullenness, ventilation, and deodorization of our kitchen, but also bring fresh air to the kitchen. It is very important for the cleaning and hygiene of the kitchen environment. It is part of the kitchen that cannot be ignored.Many people think that there is no need to replace the air fan in the kitchen to install a smoke. In fact, the range hood can only play a role in smoking, and cannot control the air circulation in the kitchen. Therefore, a kitchen exhaust fan is installed in the kitchen.very necessary.
The installation method of kitchen air fan replacement fan
1. Before installing the air change fan of the cooking room, you must carefully check whether the machine is complete, whether each component is loosened and falling off, whether the impeller collides, and whether the leaves are damaged.When choosing an outlet environment, pay attention not to have too much obstacles within 2.5-3 meters across the air outlet.
2. When installing the cooking chamber to change the air fan, the position of the fan must be parallel to the horizontal plane, and the position of the fan must be the same as the basic surface level.After the air -changing fan is completed, there must be no tilt.When installing the air -changing fan of the cooking room, the adjustment bolt of the machine must be in a convenient operation, so that the air -changing belt is relaxed when it is convenient for operation.When installing the culinary room to change the air fan bracket, the bracket must be the same as the basic surface level. If necessary, install the corner iron next to the air -changing fan to reinforce the reinforcement.After the fan is installed, check the sealing performance around.If there is a space, you can seal it with a sun or glass glue.
3. After the device is completed, carefully check whether there is residual dirt inside the air -changing fan. Use hands or mixtures to mobilize the shutters to check whether there is a collision or too tight, and whether there is an abnormal phenomenon of objects, and then perform testing.If the air -changing fan vibrate or the motor has buzzed abnormal action or other abnormal phenomena, it should be stopped for inspection, and then used after correction.