Modified asphalt cans can manually and automatically control the production of SBS, rubber powder, SBR, PE SMA modified asphalt.Part of the configuration of the modified asphalt tank is as follows:
1. Filter: Specially produced asphalt filter can effectively filter the impurities and foreign objects in the high temperature matrix asphalt to prevent damage to the follow -up equipment.
2. Catalum asphalt heater: Use a spiral plate or a tube -type heat exchanger to quickly heat the matrix asphalt to meet the needs of the production process.Heating in the seal tank avoids aging asphalt due to long -term high temperature heating and exposed to the air. The sulfide produced during the production process is quite limited to reduce environmental pollution.
3. Modified agent wind sending or spiral adding system: Pour artificially into the modified agent of the feasting bucket through wind or spiral to the asphalt ingredient tank.Can be equipped with a measurement system.
4. Automatic or manual addition system: This modified asphalt can be equipped with a measurement system.
5. Cathematical asphalt conveying and metering system: The set asphalt volume is added to the ingredient tank through the inverter and computer lock through the substrate asphalt pump and asphalt flowmeter.The matrix asphalt pumps and asphalt flowmeters use well -known brand products to ensure the distribution.
6. Asphalt ingredients: Mix asphalt mixture according to the formula, and use its combined mixer to ensure the stirring.It has a pre -cutting effect on the SBS in the asphalt.
7. Asphalt -inflated tank: It can be configured with the needs of 45 to 60 minutes of inflating time in the process.
8. Asphalt conveyor system: The prepared asphalt mixture is put into the inflatable can through the circulating pump for inflating and developing
9. Collagen grinding or three -level high -speed shear machine: It is the core of the modified asphalt equipment, directly about the quality of the product.The material is torn and crushed by the high -speed cuts of the multi -level and multi -layer and precision rotor and the high -speed cutting of the stator, so that the SBS becomes a tiny particles evenly scattered in the asphalt to form a stable colloid. This is the modified asphalt.
10. Computer automatic control system: This modified asphalt equipment can control the ratio of raw materials, flow, and the temperature of each point according to the process requirements. It can control each device according to the process, and printed production reports.
The above is the introduction of the basic configuration of modified asphalt tanks