In daily life, we must pay attention to some of their own problems?
1. Before the application, it stipulates that it has ventilation: motor screws and connectors of each component with high temperature resistance and high efficiency are tightened and solved;
2. Check the characteristics of ventilation: Is the electrical ground resistance with good high temperature resistance and the rate of rates that meets the requirements, and the main power circuit contacts.If the contacts are severely obtained, the contact should be disassembled.
3. Adjust the loosening of the transmission belt, use a manual garden garden impeller to observe whether the rotation is stable;
4. Clean the inside of the motor, impeller, filter device and case.The paint fell down and went up;
5. Check and disassemble the pads and sealing fillers between each connected surface. At the same time, check whether the development trend of the development of the valve machinery and equipment can be trusted and facilitated.